LATERAL FLAT STRAP

LATERAL FLAT STRAP

This tension element is designed to be placed as a wind bracing between tracks diagonally located to transfer loads.

Panel Rey’s metal strap is produced from hot-dip galvanized steel and has a standard G40 galvanized coating. It is manufactured with a width of 6 in.

Where To Buy

· Allows braced frames with the construction system.

· Allows the formation of vaults joined to the metal frame using lateral plates and galvanized screws.
LENGTH 10’
PIECES PER PALLET 200
TOTAL LINEAL FEET 2000
REFERENCE GAUGE USA 20
DESIGN THICKNESS (in) 0.0346
THERMAL RESISTANCE “R” 33
MINIMUM THICKNESS (in) 0.0329

All Panel Rey® resilient channels meet or exceed the following ASTM standards: · ASTM A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members · ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

Panel Rey
Panel Rey
Panel Rey

Related Productss

CORNER BEAD

CORNER BEAD

It is used to protect the corners of gypsum board walls and all edges that are exposed to damage from blows (around doors, windows or niches) or any damage due to use.
LATERAL FLAT STRAP

LATERAL FLAT STRAP

This tension element is designed to be placed as a wind bracing between tracks diagonally located to transfer loads.
FURRING CHANNEL

FURRING CHANNEL

The furring channel is designed so that the gypsum boards that will form the surface of the continuous ceiling, built-in boxes or border plates can be fixed to it with screws.
RESILIENT CHANNEL

RESILIENT CHANNEL

This metal channel is designed to be placed as a support for installing panels on wooden or metal frames and its main function is to isolate noise.